Quick3D 3DXTECH ThermaX PPE/PS
ThermaX · PPE/PS filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
A polyphenylene ether/polystyrene alloy filament built on a UL94 V-0 flame-retardant base resin. It combines strong thermal, mechanical and chemical resistance and is used in aerospace, automotive, industrial, electronics and telecom markets.
Summarised from the 3DXTECH product page.
- Material type
- High Performance
- Brand family
- ThermaX
- Polymer
- PPE/PS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
Certifications
- UL 94 V-0Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
- UL 746C (f1)UL 746C outdoor suitability rating — f1 means the material keeps its properties after UV and water exposure tests.
As stated by 3DXTECH. Ask us for the certificate if you need it for an audit.
Applications
- Aerospace
- Automotive
- Electronics
- Telecommunications
- Functional, load-bearing parts
- High-temperature parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.10g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 128°C DSC
- 112°C ISO 75 1.8MPa
Mechanical
- 2250MPa ISO 527
- 67MPa ISO 527
- 12% ISO 527
- 2300MPa ISO 178
- 85MPa ISO 178
Downloads
- Technical data sheet (TDS)THERMAX_PPE_PS_TDS_v1.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.