Quick3D 3DXTECH ThermaX PEEK
ThermaX · PEEK filament for FFF
Overview
A PEEK filament, an ultra-high-performance polymer with outstanding mechanical, thermal and chemical resistance for critical applications. It requires industrial conditions: a 360-450C hot end, a 120-160C bed and an actively heated enclosed chamber.
Summarised from the 3DXTECH product page.
- Material type
- High Performance
- Brand family
- ThermaX
- Polymer
- PEEK
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0 (base resin, datasheet rating)Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
"Datasheet" means the rating is stated on the manufacturer's datasheet, not a separate certificate. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.30g/cm³ ISO 1183
- V-0 UL 94, 1.5 mm (base resin)
Thermal
- 143°C DSC
- 140°C ISO 75, 0.45 MPa
Mechanical
- 3720MPa ISO 527
- 100MPa ISO 527
- 28% ISO 527
- 2700MPa ISO 178
- 130MPa ISO 178
Versus other PEEK
See where it ranks against the 12 other PEEK materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Themax_PEEK_TDS_v3.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.