Quick3D 3DXTECH ThermaX PEEK GF20
ThermaX · PEEK filament for FFF
Overview
PEEK filament reinforced with 20% glass fibre (sold as FibreX PEEK+GF20), adding stiffness, lower warping and better dimensional stability to PEEK's mechanical, thermal and chemical resistance. Printing needs a 360-450C hot end and heated chamber.
Summarised from the 3DXTECH product page.
- Material type
- High Performance
- Brand family
- ThermaX
- Polymer
- PEEK
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Glass Fiber 20%
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Glass fiberReinforced with glass fiber for extra stiffness and heat resistance.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.44g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 143°C DSC
- 300°C ISO 75, 0.45 MPa
Mechanical
- 7250MPa ISO 527
- 105MPa ISO 527
- 2.5% ISO 527
- 7625MPa ISO 178
- 130MPa ISO 178
Versus other PEEK
See where it ranks against the 12 other PEEK materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)FIBREX_GF20_PEEK_v2.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.