Quick3D 3DXTECH FluorX PVDF
FluorX · PVDF filament for FFF
Overview
A polyvinylidene fluoride (PVDF) filament with strong thermal and chemical resistance, rated for service up to 130C. It withstands most chemicals and solvents, suiting parts exposed to harsh environments.
Summarised from the 3DXTECH product page.
- Material type
- High Performance
- Brand family
- FluorX
- Polymer
- PVDF
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0 (base resin, datasheet rating)Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
"Datasheet" means the rating is stated on the manufacturer's datasheet, not a separate certificate. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.71g/cm³ ISO 1183
- V-0 UL 94, 1.5 mm (base resin)
Thermal
- 170°C ISO 11357
- 158°C ISO 75, 0.45 MPa
Mechanical
- 2450MPa ISO 527
- 51MPa ISO 527
- 25% ISO 527
- 1800MPa ISO 178
- 50MPa ISO 178
Versus other PVDF
See where it ranks against the 1 other PVDF material we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)FLUORX_PVDF_TDS_v3.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.