Quick3D 3DXTECH CarbonX Carbon Fiber Nylon (Gen3)
CarbonX · PA6 filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
Third-generation carbon fiber PA6 copolymer filament with a higher HDT (147C at 0.45 MPa) than earlier grades. Very rigid and wear resistant, letting designers cut weight in hotter structural applications.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- PA6
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.17g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 70°C DSC
- 147°C ISO 75, 0.45 MPa
Mechanical
- 3800MPa ISO 527
- 63MPa ISO 527
- 3% ISO 527
- 3750MPa ISO 178
- 84MPa ISO 178
Versus other PA6
See where it ranks against the 12 other PA6 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)CarbonX_PA6_G3_TDS_v3.0.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.