Quick3D 3DXTECH 3DXMAX HIPS
3DXMAX · HIPS filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
High impact polystyrene filament made from virgin resin, mainly used as a support for ABS and ASA prints. It can be snapped off by hand or dissolved in d-limonene and needs no drying.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- 3DXMAX
- Polymer
- HIPS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.04g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 100°C DSC
- 80°C ISO 75, 0.45 MPa
Mechanical
- 1350MPa ISO 527
- 40MPa ISO 527
- 18% ISO 527
- 1600MPa ISO 178
- 70MPa ISO 178
Versus other HIPS
See where it ranks against the 2 other HIPS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)3DXMAX_HIPS_TDS_v3.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.