Quick3D 3DXTECH 3DXMAX ASA
3DXMAX · ASA filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
Weatherable ASA filament that holds up under UV and sunlight, with a matte, low-sheen surface and a Tg of 105C. A good fit for outdoor parts and technical-looking prints.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- 3DXMAX
- Polymer
- ASA
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- Outdoor / UVResists sunlight and weather without yellowing or going brittle.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.07g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 105°C DSC
- 95°C ISO 75, 0.45 MPa
Mechanical
- 2010MPa ISO 527
- 45MPa ISO 527
- 10% ISO 527
- 2000MPa ISO 178
- 78MPa ISO 178
Versus other ASA
See where it ranks against the 10 other ASA materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)3DXMAX_ASA_TDS_v3.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.