Quick3D 3D4Makers R PEEK
3D4Makers · PEEK filament for FFF
Overview
Recycled PEEK filament made from regranulated VICTREX PEEK 450G production scrap, offering virgin-like performance at lower cost.
Summarised from the 3D4Makers product page.
Features
- Material type
- High Performance
- Brand family
- 3D4Makers
- Polymer
- PEEK
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3D4Makers
- Reinforcements
- None
Characteristics
- RecycledContains recycled content, as stated on the manufacturer datasheet.
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0 (datasheet rating)Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
"Datasheet" means the rating is stated on the manufacturer's datasheet, not a separate certificate. Ask us for the certificate if you need it for an audit.
Applications
- Aerospace
- Automotive
- Electrical/electronics
- Engineering
- Marine
- Chemical
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.3g/cm³ ASTM D792 (23 °C)
- V-0 UL 94/IEC60695
- 10¹⁴Ω/sq IEC 60093
Mechanical
- 3400MPa ASTM D638
- 90MPa ASTM D638
- 30% ASTM D638
Versus other PEEK
See where it ranks against the 12 other PEEK materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)3D4Makers-r-peek-filament-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3D4Makers technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.