Quick3D Fiberon PA6-CF20
Fiberon · PA6 filament for FFF
Overview
PA6 nylon loaded with 20% carbon fiber, previously PolyMide PA6-CF. It offers high stiffness, strength, heat and chemical resistance with low warping, and needs a hardened nozzle; drying and annealing are advised.
Summarised from the Polymaker product page.
- Material type
- Engineering
- Brand family
- Fiberon
- Polymer
- PA6
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Certifications
- RoHSFree of restricted hazardous substances such as lead, mercury and cadmium (EU RoHS directive) — needed for electrical and electronic products sold in the EU.
- REACHComplies with the EU REACH regulation on chemicals — no substances of very high concern above the allowed limits.
As stated by Polymaker — RoHS and REACH are Polymaker declarations covering its whole product range. Ask us for the certificate if you need it for an audit.
Applications
- Functional Prototypes
- Industrial Tooling
- Automotive Parts
- Composite Manufacturing
- Functional, load-bearing parts
- Jigs, fixtures and tooling
- High-temperature parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.17g/cm³ ISO1183, GB/T1033
- 20.5g/10 min 300°C, 2.16 kg
- HB UL 94, 1.5mm
- OL, >1012Ω/sq ANSI ESD S11.11
Thermal
- 74.2°C DSC, 10°C/min
- 218.5°C DSC, 10°C/min
- 184.6°C DSC, 10°C/min
- 446.2°C TGA, 20°C/min
- 219.2°C ISO 306, GB/T 1633
- 173°C ISO 75 1.8MPa
Mechanical
- 8636.5 ± 211.4MPa ISO 527, GB/T 1040
- 109.3 ± 2.4MPa ISO 527, GB/T 1040
- 2.1 ± 0.2% ISO 527, GB/T 1040
- 7037.6 ± 205.4MPa ISO 178, GB/T 9341
- 161.0 ± 3.9MPa ISO 178, GB/T 9341
- 35.6 ± 1.2kJ/m² ISO 179, GB/T 1043
- 24.0 ± 1.0kJ/m² ISO 179, GB/T 1043
Versus other PA6
See where it ranks against the 12 other PA6 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)TDS_FIBERON-PA6-CF20_V1.1_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.