Quick3D Fiberon ASA-CF08
Fiberon · ASA filament for FFF
Overview
ASA filament filled with 8% carbon fiber, pairing ASA's resistance to sunlight and weather with added stiffness, lower warping and a matte surface that masks layer lines. Suited to enclosures, fixtures and parts used outdoors or in heat.
Summarised from the Polymaker product page.
- Material type
- Engineering
- Brand family
- Fiberon
- Polymer
- ASA
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- Carbon Fiber
Characteristics
- Outdoor / UVResists sunlight and weather without yellowing or going brittle.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Certifications
- RoHSFree of restricted hazardous substances such as lead, mercury and cadmium (EU RoHS directive) — needed for electrical and electronic products sold in the EU.
- REACHComplies with the EU REACH regulation on chemicals — no substances of very high concern above the allowed limits.
As stated by Polymaker — RoHS and REACH are Polymaker declarations covering its whole product range. Ask us for the certificate if you need it for an audit.
Applications
- Enclosures
- Fixtures
- Load-Bearing Parts
- Jigs, fixtures and tooling
- High-temperature parts
- Outdoor, UV-exposed parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.09g/cm³ ISO1183, GB/T1033
- 13.9g/10 min 240°C, 5 kg
- HB UL 94, 1.5mm
- OL, >1012Ω/sq ANSI ESD S11.11
Thermal
- 106.6°C DSC, 10°C/min
- 328.4°C TGA, 20°C/min
- 110.8°C ISO 306, GB/T 1633
- 97.3°C ISO 75 1.8MPa
Mechanical
- 3611.7 ± 181.1MPa ISO 527, GB/T 1040
- 43.5 ± 0.7MPa ISO 527, GB/T 1040
- 1.8 ± 0.1% ISO 527, GB/T 1040
- 3265.0 ± 56.5MPa ISO 178, GB/T 9341
- 69.1 ± 1.62MPa ISO 178, GB/T 9341
- 5.5 ± 0.14kJ/m² ISO 179, GB/T 1043
- 11.0 ± 0.5kJ/m² ISO 179, GB/T 1043
Versus other ASA
See where it ranks against the 10 other ASA materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)TDS_FIBERON-ASA-CF08_V1.0_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.