Quick3D Liqcreate Elastomer-X
Liqcreate · Photopolymer resin for SLA/DLP/LCD
Overview
A clear, very soft (Shore 43A) elastic resin that mimics soft TPU and silicone and can be tinted with common resin colorants. Intended for lattice foams, soft robot grippers, grommets, bellows and other elastic parts.
Summarised from the Liqcreate product page.
Features
- Material type
- Flexible
- Brand family
- Liqcreate
- Polymer
- Photopolymer
- Processing technology
- SLA/DLP/LCD
- Material form
- Resin
- Manufacturer
- Liqcreate
- Reinforcements
- None
- Manufacturer SKU
- LEX00250 (250 g), LEX01000 (1 kg)
Characteristics
- FlexibleRubber-like material that bends and springs back.
Applications
- Digital lattice foams
- Soft end of arm tooling (EOAT) for robots
- Grommets
- Bellows
- Elastic industrial parts
- Flexible, rubber-like parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Thermal
- -5°C ASTM D7028
Mechanical
- 1.5MPa ASTM D638M
- 140–180% ASTM D638M
- 43A ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Liqcreate-Elastomer-X_V2_08-03-2022_.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Liqcreate technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.