Quick3D 3DXTECH WearX Wear Resistant PA6 Copolymer
WearX · PA6 filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
A Nylon 6 filament modified for roughly three times the wear resistance of standard PA6, with a harder, matte surface and better dimensional stability. Designed for sliding and rotating parts once machined from filled nylon stock.
Summarised from the 3DXTECH product page.
Features
- Material type
- Engineering
- Brand family
- WearX
- Polymer
- PA6
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.18g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 76°C DSC
- 198°C DSC
- 143°C ISO 75, 0.45 MPa
Mechanical
- 2458MPa ISO 527
- 62MPa ISO 527
- 18% ISO 527
- 2215MPa ISO 178
- 70MPa ISO 178
Versus other PA6
See where it ranks against the 12 other PA6 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)wearx_tds_FW_PA6_Copolymer_v1.0.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.