Quick3D Phrozen Protowhite
Phrozen Engineering · Photopolymer resin for LCD/MSLA
Get parts printed
Buy this materialStore coming soon
Overview
A white engineering resin for LCD printers, characterised after UV and thermal post-curing, with about 15 % elongation at break.
Summarised from the Phrozen product page.
- Material type
- Engineering
- Brand family
- Phrozen Engineering
- Polymer
- Photopolymer
- Processing technology
- LCD/MSLA
- Material form
- Resin
- Manufacturer
- Phrozen
- Reinforcements
- None
Characteristics
- Outdoor / UVResists sunlight and weather without yellowing or going brittle.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Thermal
- 55°C ASTM D648, 0.45 MPa
Mechanical
- 2300MPa ASTM D638
- 57MPa ASTM D638
- 15% ASTM D638
- 1431.2MPa ASTM D790
- 51.3MPa ASTM D790
- 75-77D ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Phrozen-Protowhite_EH_20251117.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Phrozen technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.