Quick3D Formlabs Flexible 80A Resin V2
Formlabs SLA · Photopolymer resin for SLA
Get parts printed
Buy this materialStore coming soon
Overview
An elastomeric resin that mimics 80A cast urethanes, TPUs and hard rubbers, springing back after repeated bending, stretching and compression.
Summarised from the Formlabs product page.
Features
- Material type
- Flexible
- Brand family
- Formlabs SLA
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLFL8002
Characteristics
- FlexibleRubber-like material that bends and springs back.
Applications
- Functional prototypes and end-use parts
- Soft inserts, jigs, and fixtures
- Custom covers, gaskets, and seals
- Shock-absorbing bumpers and enclosures
- Flexible, rubber-like parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.09g/cm³ ASTM D792-20
Thermal
- -49°C DMA, tension mode
Mechanical
- 10.0MPa ASTM D412-16
- 230% ASTM D412-16
- 83A ASTM D2240
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-flexible-80a-resin-v2-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.