Quick3D Formlabs Fast Model Resin
Formlabs SLA · Photopolymer resin for SLA
Get parts printed
Buy this materialStore coming soon
Overview
Formlabs' fastest-printing resin (up to 100 mm/hr on Form 4), intended for quick prototypes and dental models with good accuracy.
Summarised from the Formlabs product page.
Features
- Material type
- Standard
- Brand family
- Formlabs SLA
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLFMGR01
Applications
- Initial prototypes
- Rapid design iterations
- Dental models for thermoforming aligners
- Prototypes and concept models
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Thermal
- 49°C ASTM D648-16, 1.8 MPa
Mechanical
- 2480MPa ASTM D638-14
- 55MPa ASTM D638-14
- 15% ASTM D638-14
- 2600MPa ASTM D790-15
- 98MPa ASTM D790-15
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-fastmodel-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.