Quick3D Formlabs BioMed Clear Resin
Formlabs SLA · Photopolymer resin for SLA
Overview
A rigid, clear biocompatible resin for long-term skin or mucosal contact, with good wear resistance and low water uptake. It is sterilizable and backed by an FDA Device Master File.
Summarised from the Formlabs product page.
Features
- Material type
- Specialty
- Brand family
- Formlabs SLA
- Polymer
- Photopolymer
- Processing technology
- SLA
- Material form
- Resin
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLBMCL01
Certifications
- ISO 10993-5Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-10Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-3Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-11Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 18562
- USP Class VIPassed USP Class VI tests for plastics used in medical devices.
- ISO 13485 manufactured
Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Thermal
- 54°C ASTM D648-18 (Method B), 1.8 MPa
Mechanical
- 2080MPa ASTM D638-10 (Type IV)
- 52MPa ASTM D638-10 (Type IV)
- 12% ASTM D638-10 (Type IV)
- 2300MPa ASTM D790-15 (Method B)
- 84MPa ASTM D790-15 (Method B)
- 78D ASTM D2240-15 (Type D)
Versus other Photopolymer
See where it ranks against the 217 other Photopolymer materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-biomedclear-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.