Quick3D 3DXTECH CarbonX CF-PLA
CarbonX · PLA filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
A NatureWorks PLA filament filled with carbon fibre, offering high flexural stiffness, a good surface finish, low density and stable dimensions. Intended for prototypes and parts where appearance, rigidity and consistency matter.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- PLA
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- BiobasedMade mainly from renewable plant sources. Shown for PLA-based materials — PLA is produced from plant sugars such as corn or sugarcane.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.29g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 60°C DSC
- 91°C ISO 75, 0.45 MPa
Mechanical
- 4950MPa ISO 527
- 48MPa ISO 527
- 2% ISO 527
- 6320MPa ISO 178
- 89MPa ISO 178
Versus other PLA
See where it ranks against the 34 other PLA materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)CarbonX_CF_PLA_TDS_v3.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.