Quick3D 3DXTECH CarbonX Carbon Fiber ezPC Polycarbonate
CarbonX · PC filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
Carbon fiber reinforced ezPC polycarbonate that prints at 260 to 280C on most desktop machines, delivering heat resistance, stiffness and very low shrinkage. Intended for engineering-grade structural parts.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- PC
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.36g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 127°C DSC
- 119°C ISO 75, 0.45 MPa
Mechanical
- 6980MPa ISO 527
- 73MPa ISO 527
- 2.1% ISO 527
- 6540MPa ISO 178
- 85MPa ISO 178
Versus other PC
See where it ranks against the 13 other PC materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)CarbonX_CF_ezPC_TDSv1.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.