Quick3D 3DXTECH CarbonX Carbon Fiber ASA
CarbonX · ASA filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
ASA filled with 15% high-modulus carbon fiber, giving stiff, light, dimensionally stable parts with a matte finish and UV stability for outdoor use. Print through a hardened steel nozzle.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- ASA
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- Outdoor / UVResists sunlight and weather without yellowing or going brittle.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
- Outdoor Parts
- Structural Parts
- Jigs, fixtures and tooling
- High-temperature parts
- Outdoor, UV-exposed parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.11g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 105°C DSC
- 97°C ISO 75, 0.45 MPa
Mechanical
- 5355MPa ISO 527
- 48MPa ISO 527
- 3% ISO 527
- 5210MPa ISO 178
- 78MPa ISO 178
Versus other ASA
See where it ranks against the 10 other ASA materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)CarbonX_CF_ASA_TDS_v1.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.