Quick3D Fiberlogy PETG+CF
Fiberlogy · PETG filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
A carbon-fibre-reinforced PETG with increased stiffness and strength and a carbon-look finish.
Summarised from the Fiberlogy product page.
Features
- Material type
- Engineering
- Brand family
- Fiberlogy
- Polymer
- PETG
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Fiberlogy
- Reinforcements
- Carbon Fiber
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
- Prototypes
- Machine parts
- Stiff structural parts
- Functional, load-bearing parts
- Jigs, fixtures and tooling
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.32g/cm³ ISO 1183
Thermal
- 77°C ISO 306
- 69°C ISO 75, 1.8 MPa
Mechanical
- 9000MPa ISO 527
- 105MPa ISO 527
- 4% ISO 527
- 6.5kJ/m² ISO 179, 23 °C
- 45kJ/m² ISO 179, 23 °C
Versus other PETG
See where it ranks against the 33 other PETG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)FIBERLOGY_PETGCF_TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Fiberlogy technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.