Quick3D Fiberlogy Easy PETG
Fiberlogy · PETG filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
A PETG grade formulated to print almost as easily as PLA while keeping PETG strength and chemical resistance; available clear and opaque.
Summarised from the Fiberlogy product page.
Features
- Material type
- Standard
- Brand family
- Fiberlogy
- Polymer
- PETG
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Fiberlogy
- Reinforcements
- None
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
Applications
- Electronics enclosures
- Containers
- Decorative and functional parts
- Prototypes and concept models
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.29g/cm³ ASTM D792
Thermal
- 80°C ASTM D3418
- 78°C ISO 306
- 62°C ISO 75, 1.8 MPa
Mechanical
- 2800MPa ISO 527
- 51MPa ISO 527 (at yield)
- 29% ISO 527
- 2000MPa ISO 178
- 70MPa ISO 178
Versus other PETG
See where it ranks against the 33 other PETG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)FIBERLOGY_EASYPETG_TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Fiberlogy technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.