Quick3D Polymaker PolyCore PETG-1013
PolyCore · PETG pellets for Pellet extrusion
Get parts printed
Buy this materialStore coming soon
Overview
PETG pellets filled with 30% glass fiber by mass for big-area additive manufacturing, noted for resisting warping and weathering while printing reliably.
Summarised from the Polymaker product page.
Features
- Material type
- Engineering
- Brand family
- PolyCore
- Polymer
- PETG
- Processing technology
- Pellet extrusion
- Material form
- Pellets
- Manufacturer
- Polymaker
- Reinforcements
- Glass Fiber 30%
Characteristics
- Outdoor / UVResists sunlight and weather without yellowing or going brittle.
- Glass fiberReinforced with glass fiber for extra stiffness and heat resistance.
Physical
- 1.39g/cm³ ASTM D792 (ISO 1183, GB/T 1033)
Thermal
- 81°C DSC, 10 °C/min
- 77°C ISO 75 1.8MPa
Mechanical
- 6094 ± 1344MPa Modified ASTM D790 (ISO 178, GB/T 9341)
- 128.1 ± 7.8MPa Modified ASTM D790 (ISO 178, GB/T 9341)
- 21.3 ± 0.92kJ/m² Modified ASTM D256 (ISO 179, GB/T 1043)
Versus other PETG
See where it ranks against the 33 other PETG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)PolyCore-PETG-1013_TDS_EN_V1.1.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.