Quick3D Polymaker PolySupport
PolySupport · PVA filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
Breakaway support filament for Polymaker PLA-based materials that snaps off by hand without solvents, working on single- or dual-extruder printers with no enclosure.
Summarised from the Polymaker product page.
- Material type
- Support
- Brand family
- PolySupport
- Polymer
- PVA
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- None
Characteristics
- Dissolvable supportSupport material that is removed after printing — dissolved or broken away.
Certifications
- REACHComplies with the EU REACH regulation on chemicals — no substances of very high concern above the allowed limits.
- RoHSFree of restricted hazardous substances such as lead, mercury and cadmium (EU RoHS directive) — needed for electrical and electronic products sold in the EU.
As stated by Polymaker — RoHS and REACH are Polymaker declarations covering its whole product range. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.22g/cm³ ISO1183, GB/T 1033
- 3-6g/10 min 220°C, 2.16 kg
Chemical resistance
Downloads
- Technical data sheet (TDS)TDS_Polymaker_PolySupport_v5.5_2026-01-14_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.