Quick3D 3DXTECH ThermaX PEI 1010
ThermaX · PEI filament for FFF
Overview
A filament compounded from ULTEM 1010 PEI resin, an amorphous high-performance polymer with a very high Tg. It retains strong mechanical, thermal and chemical properties at elevated temperatures for critical, high-cleanliness applications.
Summarised from the 3DXTECH product page.
- Material type
- High Performance
- Brand family
- ThermaX
- Polymer
- PEI
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0 (base resin, datasheet rating)Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
"Datasheet" means the rating is stated on the manufacturer's datasheet, not a separate certificate. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.27g/cm³ ISO 1183
- V-0 UL 94, 1.5 mm (base resin)
Thermal
- 217°C DSC
- 208°C ISO 75, 0.45 MPa
Mechanical
- 2500MPa ISO 527
- 56MPa ISO 527
- 3% ISO 527
- 2510MPa ISO 178
- 110MPa ISO 178
Versus other PEI
See where it ranks against the 15 other PEI materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)THERMAX_PEI_1010_TDS_v4.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.