Quick3D Formlabs Polypropylene Powder
Formlabs SLS · PP powder for SLS
Overview
Genuine polypropylene SLS powder for the Fuse 1+ 30W, giving ductile parts that tolerate repeated bending. Parts are chemically resistant and can be welded to other polypropylene parts.
Summarised from the Formlabs product page.
Features
- Material type
- Engineering
- Brand family
- Formlabs SLS
- Polymer
- PP
- Processing technology
- SLS
- Material form
- Powder
- Manufacturer
- Formlabs
- Reinforcements
- None
- Manufacturer SKU
- FLPLPG01
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
Certifications
- ISO 10993-5Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-10Tested for biological safety when in contact with the human body (ISO 10993).
- ISO 10993-23Tested for biological safety when in contact with the human body (ISO 10993).
Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 0.89g/cm³ In-house method (bulk density, sintered)
Thermal
- 132°C ASTM D1525
- 58°C ASTM D648-16, 1.8 MPa
Mechanical
- 1640MPa ASTM D638-14 Type 1
- 29MPa ASTM D638-14 Type 1
- 34% ASTM D638-14 Type 1
- 1330MPa ASTM D790-17
- 37MPa ASTM D790-17
Versus other PP
See where it ranks against the 16 other PP materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Formlabs-polypropylene-TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Formlabs technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.