Quick3D 3DXTECH MAX-G PCTG
MAX-G · PCTG filament for FFF
Overview
A PCTG polyester filament positioned as a tougher alternative to PETG, with better clarity plus improved chemical and impact resistance. Low shrinkage and good dimensional stability suit engineering parts, and it prints on open desktop printers without a heated chamber.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- MAX-G
- Polymer
- PCTG
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.23g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 78°C DSC
- 76°C ISO 75, 0.45 MPa
Mechanical
- 1755MPa ISO 527
- 45MPa ISO 527
- 24% ISO 527
- 1600MPa ISO 178
- 72MPa ISO 178
Versus other PCTG
See where it ranks against the 3 other PCTG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)MAXG_PCTG_TDS_v1.0.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.