Quick3D 3DXTECH CarbonX PP+CF
CarbonX · PP filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
A carbon-fibre-reinforced polypropylene copolymer filament developed for 3D printing. It prints easily, holds its dimensions well and gives an attractive surface; its low density means a full reel holds 650 g.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- PP
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.1g/cm³ ISO 1183
- >10⁸Ω/sq ASTM D257
Thermal
- 124°C ISO 75, 0.45 MPa
Mechanical
- 6150MPa ISO 527
- 78MPa ISO 527
- 1.5% ISO 527
- 6100MPa ISO 178
- 68MPa ISO 178
Versus other PP
See where it ranks against the 16 other PP materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)CarbonX_CF_PP_TDSv1.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.