Quick3D 3DXTECH CarbonX Carbon Fiber Ultem 9085
CarbonX · PEI filament for FFF
Overview
A filament combining SABIC Ultem 9085 PEI with 15% high-modulus carbon fibre, formulated for aerospace users. The fibre adds strength and stiffness while keeping good dimensional stability, and the Ultem 9085 base meets FST requirements.
Summarised from the 3DXTECH product page.
- Material type
- High Performance
- Brand family
- CarbonX
- Polymer
- PEI
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Certifications
- FAR 25.853Meets the US aviation flammability requirement (FAR 25.853) for materials used inside aircraft cabins.
- OSU 65/65Meets the OSU 65/65 heat-release limits used for materials inside aircraft cabins.
As stated by 3DXTECH. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.39g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 186°C DSC
- 165°C ISO 75, 0.45 MPa
Mechanical
- 8600MPa ISO 527
- 93MPa ISO 527
- 2% ISO 527
- 8450MPa ISO 178
- 120MPa ISO 178
Versus other PEI
See where it ranks against the 15 other PEI materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)CarbonX_CF_Ultem_9085_TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.