Quick3D Stratasys ULTEM 1010 Resin
FDM · PEI filament for FFF
Overview
A high-performance PEI filament with high tensile strength, broad chemical resistance and excellent thermal stability. Its heat resistance allows autoclaving, so it is used for sterilisable parts and composite lay-up tooling.
Features
- Material type
- High Performance
- Brand family
- FDM
- Polymer
- PEI
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Stratasys
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0 (datasheet rating)Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
"Datasheet" means the rating is stated on the manufacturer's datasheet, not a separate certificate. Ask us for the certificate if you need it for an audit.
Applications
- Sterilization applications
- Composite lay-up tooling
- Functional, load-bearing parts
- High-temperature parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.290g/cm³ Specific gravity, ASTM D792, @ 23 °C (molded plaques)
- V-0 UL 94 (UL Blue Card)
Thermal
- 209.37°C ASTM D7426, inflection point (molded plaques)
- 215.12°C ASTM D648 Method B, 264 psi
Mechanical
- 3040 ± 180MPa ASTM D638
- 79.2 ± 4.9MPa ASTM D638 (strength at break)
- 4.0 ± 0.42% ASTM D638
- 2910 ± 49MPa ASTM D790, Procedure A
- 128 ± 1.8 (at 5% strain)MPa ASTM D790, Procedure A
Electrical
- 2.841 ASTM D150, 1 kHz (XY)
Versus other PEI
See where it ranks against the 15 other PEI materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)MDS_FDM_ULTEM-1010-Resin_0626a.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Stratasys technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.