Quick3D Lubrizol ESTANE 3D TPU M95A-545 OR UV
ESTANE 3D · TPU powder for MJF
Get parts printed
Buy this materialStore coming soon
Overview
ESTANE 3D TPU M95A-545 OR UV is a polyether TPU powder from Lubrizol for HP Multi Jet Fusion printing, certified for skin sensitisation and cytotoxicity. It is designed for easy, cold unpacking and suits lattice structures.
Features
- Material type
- Flexible
- Brand family
- ESTANE 3D
- Polymer
- TPU
- Processing technology
- MJF
- Material form
- Powder
- Manufacturer
- Lubrizol
- Reinforcements
- None
Characteristics
- FlexibleRubber-like material that bends and springs back.
- Outdoor / UVResists sunlight and weather without yellowing or going brittle.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.10 - 1.15g/cm³ ASTM D-792 (specific gravity, printed part)
Thermal
- 200°C Lubrizol DSC (base resin)
- 161°C ASTM D-1525 (10N)
Mechanical
- 17MPa DIN-53504 / ISO-37 (X, full bed)
- 400% DIN-53504 / ISO-37 (X, full bed)
- 85MPa ASTM D-790
- 93A ASTM D-2240 (5 sec)
Versus other TPU
See where it ranks against the 30 other TPU materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)ESTANE®-3D-TPU-M95A-545-OR-UV_TDS.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Lubrizol technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.