Quick3D Markforged Carbon Fiber
Markforged filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
Continuous Carbon Fiber has the highest strength-to-weight ratio of Markforged's reinforcing fibres and is laid inside parts printed from a composite base such as Onyx. It is typically used for parts that replace machined aluminium.
Features
- Material type
- Engineering
- Brand family
- Markforged
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Markforged
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
- Replacement of machined aluminum parts
- Functional, load-bearing parts
- Jigs, fixtures and tooling
- High-temperature parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.4g/cm³
Thermal
- 105°C ASTM D648 Method B (0.45 MPa)
Mechanical
- 60000MPa ASTM D3039
- 800MPa ASTM D3039
- 1.5% ASTM D3039
- 51000MPa ASTM D790 (method similar to D790)
- 540MPa ASTM D790 (method similar to D790)
Downloads
- Technical data sheet (TDS)CompositesMaterialDatasheet.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Markforged technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.