Quick3D Ultrafuse 17-4PH
Ultrafuse · 17-4 PH stainless steel filament for Metal FFF
Get parts printed
Buy this materialStore coming soon
Overview
A metal-filled filament for making 17-4PH stainless steel parts on standard FFF printers; after debinding and sintering the parts can be fully heat treated for high strength and hardness.
Features
- Material type
- Metal
- Brand family
- Ultrafuse
- Polymer
- 17-4 PH stainless steel
- Processing technology
- Metal FFF
- Material form
- Filament
- Manufacturer
- Forward AM
- Reinforcements
- None
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 7.600g/cm³ ISO 3369 (sintered part)
Mechanical
- 191000MPa ISO 527 (as sintered)
- 990MPa ISO 6892-1 (as sintered)
- 4% ISO 6892-1 (as sintered)
Versus other 17-4 PH stainless steel
See where it ranks against the 1 other 17-4 PH stainless steel material we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Ultrafuse_17-4PH_TDS_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Forward AM technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.