Quick3D Ultrafuse PPSU
Ultrafuse · PPSU filament for FFF
Overview
A PPSU filament combining outstanding thermal stability, good chemical resistance and high strength; it is flame retardant and can be hot-steam sterilized.
Features
- Material type
- High Performance
- Brand family
- Ultrafuse
- Polymer
- PPSU
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Forward AM
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0 (datasheet rating)Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
"Datasheet" means the rating is stated on the manufacturer's datasheet, not a separate certificate. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.194g/cm³ ISO 1183-1
- 13.2g/10 min ISO 1133 (360 °C, 5 kg)
- V-0 UL 94 (1.5 mm, 3.0 mm)
- 4.1 × 10¹⁵Ω/sq IEC 62631-3-2 (XY)
Thermal
- 222°C ISO 11357-2
- 217°C ISO 306, 50 N
- 211°C ISO 75-2, 1.8 MPa
Mechanical
- 2221MPa ISO 527
- 74.5MPa ISO 527
- 7.3% ISO 527
- 1940MPa ISO 178
- 105MPa ISO 178
- 21.8kJ/m² ISO 179-2
- 224.8kJ/m² ISO 179-2
- 77D DIN ISO 7619-1 (15 s)
Electrical
- 18.5kV/mm IEC 60243-1 (XY)
Versus other PPSU
See where it ranks against the 5 other PPSU materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Ultrafuse_PPSU_TDS_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Forward AM technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.