Quick3D Ultrafuse PP GF30
Ultrafuse · PP filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
A polypropylene filament reinforced with 30% glass fibre and designed specifically for 3D printing; it is chemically resistant, stiff and UV resistant.
Features
- Material type
- Engineering
- Brand family
- Ultrafuse
- Polymer
- PP
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Forward AM
- Reinforcements
- Glass Fiber 30%
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Outdoor / UVResists sunlight and weather without yellowing or going brittle.
- Glass fiberReinforced with glass fiber for extra stiffness and heat resistance.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.036g/cm³ ISO 1183-1
Thermal
- -5°C ISO 11357-2
- 158°C ISO 11357-3
- 125°C
- 138°C ISO 306, 50 N
- 117°C ISO 75-2, 1.8 MPa
Mechanical
- 2628MPa ISO 527
- 41.7MPa ISO 527
- 4.4% ISO 527
- 3507MPa ISO 178
- 76.8MPa ISO 178
- 5.3kJ/m² ISO 179-2
- 23.1kJ/m² ISO 179-2
- 73D DIN ISO 7619-1 (15 s)
Versus other PP
See where it ranks against the 16 other PP materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Ultrafuse_PP_GF30_TDS_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Forward AM technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.