Quick3D Overview
A PET filament that prints as easily as PLA while giving good layer adhesion.
Features
- Material type
- Standard
- Brand family
- Ultrafuse
- Polymer
- PET
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Forward AM
- Reinforcements
- None
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.329g/cm³ ISO 1183-1
Thermal
- 71°C ISO 11357-2
- 64°C ISO 306, 50 N
- 64°C ISO 75-2, 1.8 MPa
Mechanical
- 1933MPa ISO 527
- 33.4MPa ISO 527
- 2.7% ISO 527
- 2063MPa ISO 178
- 66.7MPa ISO 178
- 1.6kJ/m² ISO 179-2
- 18.4kJ/m² ISO 179-2
Versus other PET
See where it ranks against the 4 other PET materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)Ultrafuse_PET_TDS_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Forward AM technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.