Quick3D Polymaker PolyMide-CoPA
PolyMide · PA6,66 filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
Nylon 6/6,6 copolymer filament balancing high strength and toughness with heat resistance up to 180°C, aimed at demanding mechanical components.
Summarised from the Polymaker product page.
- Material type
- Engineering
- Brand family
- PolyMide
- Polymer
- PA6,66
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- None
Certifications
- REACHComplies with the EU REACH regulation on chemicals — no substances of very high concern above the allowed limits.
- RoHSFree of restricted hazardous substances such as lead, mercury and cadmium (EU RoHS directive) — needed for electrical and electronic products sold in the EU.
As stated by Polymaker — RoHS and REACH are Polymaker declarations covering its whole product range. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.12g/cm³ ISO1183, GB/T 1033
- 12g/10 min 260°C, 1.2kg
Thermal
- 66°C DSC, 10°C/min
- 189°C DSC, 10°C/min
- 148°C DSC, 10°C/min
- 370°C TGA, 20°C/min
- 180°C ISO 306, GB/T 1633
- 70°C ISO 75 1.8MPa
Mechanical
- 2703 ± 259MPa ISO 527, GB/T 1040
- 78.0 ± 0.7MPa ISO 527, GB/T 1040
- 12.7 ± 2.1% ISO 527, GB/T 1040
- 2510 ± 25MPa ISO 178, GB/T 9341
- 109.8 ± 1.3MPa ISO 178, GB/T 9341
- 6.9 ± 1.4kJ/m² ISO 179, GB/T 1043
Chemical resistance
Downloads
- Technical data sheet (TDS)TDS_Polymaker_PolyMide-CoPA_V5.5_2026-01-06_EN.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.