Quick3D Polymaker PolyCore TPU-2000
PolyCore · TPU pellets for Pellet extrusion
Get parts printed
Buy this materialStore coming soon
Overview
Thermoplastic polyurethane pellet grade for pellet-fed printers, with a Shore hardness around 95A for producing flexible parts.
Summarised from the Polymaker product page.
- Material type
- Flexible
- Brand family
- PolyCore
- Polymer
- TPU
- Processing technology
- Pellet extrusion
- Material form
- Pellets
- Manufacturer
- Polymaker
- Reinforcements
- None
Characteristics
- ESD-safeStatic-dissipative (surface resistivity 10⁹ Ω/sq or lower) — safe around sensitive electronics.
- FlexibleRubber-like material that bends and springs back.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.3g/cm³ ASTM D792 (ISO 1183, GB/T 1033)
- 5.6g/10 min 230 °C, 2.16 kg
- 10 × 10⁵ (dry state)Ω/sq ASTM D991 (GB/T 2439, ISO 1853)
Thermal
- 187°C DSC, 10 °C/min
- 149°C DSC, 10 °C/min
Mechanical
- 36.9 ± 3.2MPa ASTM D638 (ISO527, GB/T 1040)
- 558.5 ± 57.8% ASTM D638 (ISO527, GB/T 1040)
- ~95A ASTM D2240 (ISO 7619, GB/T 31)
Versus other TPU
See where it ranks against the 30 other TPU materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)PolyCore-TPU-2000_TDS_EN_V1.pdf Download
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.