Quick3D 3D4Makers r-UltraMarathon PP GF
3D4Makers · PP filament for FFF
Get parts printed
Buy this materialStore coming soon
Overview
Glass-fibre-reinforced PP filament made from 100% post-consumer recycled polypropylene, stiff, low-warp and low in moisture uptake.
Summarised from the 3D4Makers product page.
Features
- Material type
- Engineering
- Brand family
- 3D4Makers
- Polymer
- PP
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3D4Makers
- Reinforcements
- Glass Fiber 30%
Characteristics
- RecycledContains recycled content, as stated on the manufacturer datasheet.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Outdoor / UVResists sunlight and weather without yellowing or going brittle.
- Glass fiberReinforced with glass fiber for extra stiffness and heat resistance.
Applications
- Outdoor components
- Marine parts
- Drone housings
- Enclosures
- Lightweight structural elements
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.120g/cm³ ISO 1183
Mechanical
- 5463MPa ISO 527-2
- 67.1MPa ISO 527-2
- 3.59% ISO 527-2
- 5563MPa ISO 178
- 105.7MPa ISO 178
- 71D ISO 868
Versus other PP
See where it ranks against the 16 other PP materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Technical data sheet (TDS)r-ultramarathon-pp-gf Download
- Quick3D summaryThis page as a printable PDF
Values from the 3D4Makers technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.